The Spare Parts Kit "Dealer" for the Luxe IDOL includes everything so you and your Luxe IDOL are ready on gameday.  

The Color Accent Kit for the Luxe IDOL. With the Color Accent Kit you can give your LUXE IDOL new highlights. Whether 2-, 3-colored or completely colorful - everything is possible! Scope of delivery: - Trigger - Eye cover - Regulator cover - Backstrap - Bolt end cap - Feedneck lever - Freak Back Not compatible with earlyer marker generations.  

Luxe IDOL spare part barrel tip black polished (single item)  

DLX Luxe IDOL Spare Part: LUX718 Vision BottomThe bottom half of the IDOL Vision system. This part of the eye cable is installed in the gripframe of the Luxe IDOL and provides the connection to the main board.  

DLX Luxe IDOL Spare Part: LUX719.1 Vision TopThe upper half of the IDOL Vision system. This part of the eye cable is installed in the body of the Luxe IDOL and provides the actual light barrier for the ball control.  

Original DLX  Luxe IDOL spare part-kit ASA Spring with lever and Pin [SPR044, LUX737, LUX739]  

Luxe IDOL spare part: LUX764 Air passage ASA to Gripframe and Gripframe to Body for the Luxe IDOL The air flow between the assemblies of the Luxe IDOL is made by this connector. Both the connection between the body and the gripframe, as well as gripframe and ASA  

Original DLX  Luxe IDOL spare part: backstrap seal [LUX715.1]  

Original DLX Luxe IDOL spare part: bolt insert [LUX702 & LUX702.1]  

Original Luxe IDOL spare part: core cap LUX761  

Luxe IDOL display (LCD001), fits only by the Luxe IDOLMulti-color display that sits on the left side of the handle of the Luxe IDOL and is used to communicate the marker status. The display is connected to the main board of the Luxe IDOL using a flexible ribbon cable.  

DLX Luxe IDOL spare part: CLP017L Eye-Cover Magnet-Retaining-Clip left This is the retaining clip that holds the magnets on the body of the Luxe IDOL in place, to which the eye cover are attracted, left hand side  

DLX Luxe IDOL spare part: CLP017R Eye-Cover-Magnetic-Retaining-Clip right This is the retaining clip that holds the magnets on the body of the Luxe IDOL in place, to which the eye cover are attracted, right hand side  

Luxe IDOL Grip (LUX716), suitable for the Luxe IDOL New handle made of improved materials for an even better feel. for the Luxe IDOL including completely revised display protection.  

DLX Luxe IDOL spare part LUX717 Main Board This is the Main Board for the Luxe IDOL  

Original DLX Luxe IDOL spare part: Bolt inner part complete consisting of LUX759.1 and LUX759.2 as well as all O-rings.  

Original DLX Luxe IDOL spare part: quiet vent bolt wave slot [LUX709]  

Original DLX Luxe IDOL spare part: shuttle spring [SPR103]  

The IDOL Method Bolt Kit has been completely redesigned and consists of a new bolt tip, bolt guide, bolt center section, a new valve stem, valve switch and two different valve springs. Features: The bolt tip has been replaced with Method's proven Soft Tip, which reduces restrictions within the bolt. The number of components has been reduced by combining the rear bolt section and the bolt guide, which contributes to easier maintenance. The pin guide and pin have been redesigned to provide smoother acceleration and air cushioned braking. This results in smoother paint handling and less mechanical kickback. The main valve seal has been relocated from the valve stem to the pin guide. This allows a larger, more reliable, static valve seal to be used. This improves reliability and air flow. Supplied with two different valve springs. Gold for those who want higher efficiency and silver for those who want a softer stop. Assembly: Pull the standard idol bolt out of the body. Remove the standard valve switch and the valve spring from the rear housing Lightly grease the new valve switch and install it in the rear housing with the cavity facing you. Install the valve spring on the valve stem. Apply light pressure to the spring guide in the valve stem. This holds the spring in the valve stem so that it does not fall out during maintenance. . Ensure that the entire bolt is well lubricated and insert it into the body. ATTENTION, If the Method Bolt cannot be screwed onto the rear housing (LUX626.1), please do not use force and cancel the assembly. Please contact us so that we can help you. Thank you.  

Original DLX Luxe IDOL/TM40 spare part QEV without seal [LUXQEV]  

Luxe IDOL / TM40 spare part: LUX604 bolt back with QEVThe rear assembly of the Luxe IDOL bolt, including O-rings, seals and QEV  

DLX Luxe IDOL/TM40 Spare Part: QEV105 QEV Seal This is the QEV Seal for the Luxe IDOL or the Luxe TM40.  

Original DLX  Luxe IDOL / TM40 spare part: shuttle [LUX660]  

Original DLX Luxe IDOL spare part tail cover decal [STK023]