Over the past few decades, the FREAK® barrel system has won more tournaments and is used by more players than any other barrel or barrel system on the market. The FREAK® POWER barrel system therefore adheres strictly to its own standards in order to maintain this high level of performance. In addition, the individual components can now also be used with any other "POWER" barrel system. But there is no substitute for quality. Simplicity combined with flexibility is what continues to set the FREAK® POWER barrel system apart from all its competitors: - 1 rear section (back) that fits your marker, - 1 front section (front) that determines your barrel length and thus your accuracy, and - 1 insert, whose internal diameter can be adjusted to suit the paintball, together form a complete FREAK® POWER barrel. For each of the three components of the FREAK® POWER barrel system, there is a wide range of options to choose from, ranging from different thread types to suit most markers on the market, through to the classic barrel front, and including 7 different internal diameters for the inserts. The product presented here is a FREAK® POWER barrel back Tippmann backs are supplied as Autococker backs with the corresponding barrel adapter not compatible with 8-inch Freak XL parts (XL and XL 2023) not compatible with 5-inch Freak parts (Classic Freak)  

The compact Battle Boy barrel bag without contents Highly sought-after, extremely practical, and stylish: the new barrel bag for the Freak POWER set. The bag is designed for Freak POWER (8.5-inch barrels) and therefore also fits Freak XL (8-inch) and Classic Freak (5-inch) barrels. The soft case holds barrels and fronts (up to max. 16"). The bag has space for 8 barrels/fronts. The barrel set is protected from knocks and scratches during transport in the bag. Dimensions: 24.5 cm length 9 cm diameter Compatible with Freak POWER, Freak XL, and Classic Freak.  

The Freak insert system has been the industry standard for over two decades. The new Freak POWER inserts and compatible with the PWR inserts, fronts and backs that have been recently introduced by numerous other manufacturers.  Our new Freak POWER inserts offer a better product at a reasonable price. Why pay more for less? - Freak POWER Inserts - Type 3 hard coat anodized. - Precision machined micro honed mirror finish. - Aircraft grade 6061-T6 Aluminum Alloy. Inserts included: .678 .680 .682 .684 .686 .688 .691 PLEASE NOTE: Inserts are NOT compatible with Freak Classic and Freak XL  

Over the past few decades, the FREAK® barrel system has won more tournaments and is used by more players than any other barrel or barrel system on the market. The FREAK® POWER barrel system therefore adheres strictly to its own standards in order to maintain this high level of performance. In addition, the individual components can now also be used with any other "POWER" barrel system. But there is no substitute for quality. Simplicity combined with flexibility is what continues to set the FREAK® POWER barrel system apart from all its competitors: - 1 rear section (back) that fits your marker, - 1 front section (front) that determines your barrel length and thus your accuracy, and - 1 insert, whose internal diameter can be adjusted to suit the paintball, together form a complete FREAK® POWER barrel. For each of the three components of the FREAK® POWER barrel system, there is a wide range of options to choose from, ranging from different thread types for most markers on the market, through the classic barrel front, to 7 different internal diameters for the inserts. The product presented here is a FREAK® POWER barrel front (Front) not compatible with 8-inch Freak XL parts (XL and XL 2023) not compatible with 5-inch Freak parts (Classic Freak) Translated with DeepL.com (free version)  

The Freak insert system has been the industry standard for over two decades. The new Freak POWER inserts and compatible with the PWR inserts, fronts and backs that have been recently introduced by numerous other manufacturers.  Our new Freak POWER inserts offer a better product at a reasonable price. Why pay more for less? The set offered here is a supplement to the Freak POWER sleeves included with the DLX Luxe AIRE, to complete a Boremaster kit (7 sleeves). - Freak POWER Inserts - Type 3 hard coat anodized. - Precision machined micro honed mirror finish. - Aircraft grade 6061-T6 Aluminum Alloy. Inserts included: .678 .682 .686 .691 PLEASE NOTE: Inserts are NOT compatible with Freak Classic and Freak XL  

The Freak insert system has been the industry standard for over two decades. The new Freak POWER inserts are compatible with the PWR inserts, fronts, and backs that have recently been introduced by numerous other manufacturers. Our new Freak POWER inserts offer a better product at a reasonable price. Why pay more for less? PLEASE NOTE: Inserts are NOT compatible with Freak Classic and Freak XL  

The FREAK® barrel system has won more tournaments in past decades and is used by more players than any other barrel or barrel system on the market. The simplicity combined with its flexibility is what distinguishes the FREAK® barrel system from all competitors,- 1 barrel back, that fits your marker,- 1 barrel front, which determines your barrel length and thus precision, and- 1 barrel insert, whose inner diameter can be adjusted to fit your paintball,combined complete a FREAK® barrel. For each of these three components of the FREAK® barrel system, there is a wide variety of options to choose from, threads for most markers on the market,  the classic barrel front, All American barrel front or All Condition Performance barrel front and 9 different inner diameters for the inserts. In 2023 the FREAK® XL barrel system received a facelift and presents itself in a revised design. The FREAK® XL inserts with 8 inch (20 cm) length are now standard. With the FREAK® barrel system redesign player input was analyzed to improve handling and special attention was given to the performance of all components to give players the best possible shot with the all new FREAK® XL barrel system. not compatible with 5 inch Freak parts (Original Freak)  

With its ability to adapt to changing paint size and quality without requiring a gear bag loaded down with barrel backs, the FREAK® barrel system set the world standard for portability, performance and flexibility. In its 8-inch (20 centimeter) XL control bore size, the FREAK® XL barrel system is even better, delivering improved efficiency and consistency. Trust the Original, the FREAK® barrel system has won more tournaments in past decades and is used by more players than any other barrel or barrel system on the market. The simplicity combined with its flexibility is what made the FREAK® barrel system the leading barrel system on the market,- 1 barrel back, that fits your marker,- 1 barrel front, which determines your barrel length and thus precision, and- 1 barrel insert, whose inner diameter can be adjusted to fit your paintball,combined complete a FREAK® barrel. For each of these three components of the FREAK® barrel system there is a wide variety of options to choose from, threads for most markers on the market, the classic barrel front, All American barrel front or All Condition Performance barrel front and 9 different inner diameters for the inserts. In 2023 the FREAK® XL barrel system received a facelift and presents itself in a revised design. The FREAK® XL inserts with 8 inch (20 cm) length are now standard. During redesign of the FREAK® barrel system player input was analyzed and the handling was significantly improved with the new design. Special attention was given to the performance of all components to give players the best possible shot with the all new FREAK® XL barrel system. Now the Freak® ACP™ barrel fronts are taking on rough weather, mud and even paint fill.Taking their name from All-Conditions Performance, The Freak® ACP™ barrels combine the power of the Freak® XL system with an all new barrel front designed to keep going through the worst field conditions. On the outside four rows of barrel porting help equalize air pressure in the barrel with the outside air for a smooth and quiet transition from acceleration to free flight. On the inside the Freak® ACP™ sports an all new look. Sixteen rows of smoothly transitioned grooves and rails bring the benefits of straight rifling to the Freak® XL.Rather than spinning the paintball with a spiral rifling pattern, ACP™ straight rifling provides the same linear path as a traditional smooth barrel while being better equipped to cope with the barrel fouling that comes with rough weather. Once the paintball exits the Freak® XL control bore, it literally rides on rails through the length of the barrel front. Dust, mud, paint fill or rain can literally be blown out of the way into the grooves of the ACP™ rifling, rather than wedging between the ball and barrel wall where they cause off axis spin and hook shots, or worse - binding and breaking the ball in the barrel. Field proven by some of the world's top players through their development cycle, ACP™ barrel fronts shoot cleaner, faster when the going gets rough. They put more paint on target in less time, which is the Freak® XL's winning advantage.Paint changes. Weather changes. The Freak® XL with ACP™ is ready. not compatible with 5 inch FREAK parts (Original FREAK®)  

With its ability to adapt to changing paint size and quality without requiring a gear bag loaded down with barrel backs, the FREAK® barrel system set the world standard for portability, performance and flexibility. In its 8-inch (20 centimeter) XL control bore size, the FREAK® XL barrel system is even better, delivering improved efficiency and consistency. Trust the Original, the FREAK® barrel system has won more tournaments in past decades and is used by more players than any other barrel or barrel system on the market. The simplicity combined with its flexibility is what made the FREAK® barrel system the leading barrel system on the market,- 1 barrel back, that fits your marker,- 1 barrel front, which determines your barrel length and thus precision, and- 1 barrel insert, whose inner diameter can be adjusted to fit your paintball,combined complete a FREAK® barrel. For each of these three components of the FREAK® barrel system there is a wide variety of options to choose from, threads for most markers on the market,  the classic barrel front, All American barrel front or All Condition Performance barrel front and 9 different inner diameters for the inserts. In 2023 the FREAK® XL barrel system received a facelift and presents itself in a revised design. The FREAK® XL inserts with 8 inch (20 cm) length are now standard. During redesign of the FREAK® barrel system player input was analyzed and the handling was significantly improved with the new design. Special attention was given to the performance of all components to give players the best possible shot with the all new FREAK® XL barrel system. Tippmann Back will be delivered as Autococker Back with matching tread adapter.not compatible with 5 inch FREAK parts (Original FREAK®)  

With its ability to adapt to changing paint size and quality without requiring a gear bag loaded down with barrel backs, the FREAK® barrel system set the world standard for portability, performance and flexibility. In its 8-inch (20 centimeter) XL control bore size, the FREAK® XL barrel system is even better, delivering improved efficiency and consistency. Trust the Original, the FREAK® barrel system has won more tournaments in past decades and is used by more players than any other barrel or barrel system on the market. The simplicity combined with its flexibility is what made the FREAK® barrel system the leading barrel system on the market,- 1 barrel back, that fits your marker,- 1 barrel front, which determines your barrel length and thus precision, and- 1 barrel insert, whose inner diameter can be adjusted to fit your paintball,combined complete a FREAK® barrel. For each of these three components of the FREAK® barrel system there is a wide variety of options to choose from, threads for most markers on the market,  the classic barrel front, All American barrel front or All Condition Performance barrel front and 9 different inner diameters for the inserts. In 2023 the FREAK® XL barrel system received a facelift and presents itself in a revised design. The FREAK® XL inserts with 8 inch (20 cm) length are now standard. During redesign of the FREAK® barrel system player input was analyzed and the handling was significantly improved with the new design. Special attention was given to the performance of all components to give players the best possible shot with the all new FREAK® XL barrel system. Not compatible with 5 inch FREAK parts (Original FREAK®)  

The FREAK® running system has won more tournaments and is used by more players over the past few decades than any other run or running system on the market. The simplicity with simultaneous flexibility is what distinguishes the FREAK® running system from all competitors, - 1 barrel back part (back) that fits your marker, - 1 front part of the barrel (front), which determines your barrel length and thus precision, and - 1 sleeve (insert) whose inner diameter can be adjusted to the paintball, together make a complete FREAK® run. There is a variety of choices for each of the three components of the FREAK® barrel system, from different threads for most markers on the market, to the classic barrel front, All American barrel front or All Condition Performance barrel front, to 9 different inner diameters for the sleeves. In 2023 the FREAK® XL running system got a facelift and presents itself in a revised design. In addition to the fact that the FREAK® XL sleeves with their 20 centimeters (8 inches) length are now standard, a large number of player inputs were listened to and the handling was significantly improved with the new design. During the revision, special attention was paid to the performance of all components in order to enable the most reliable shot pattern of all time, and the fronts were redesigned for this. The product presented here is a running front (front) in many new attractive colors and a matt or polished surface, which leads to new customization options. not compatible with 5 inch Freak parts (Classic Freak)